NEW! GLASSCOAT™ | COSMIC SPRITZ SPRAYCOAT

€44.83 exkl. 19% MwSt

Extremly easy to use
Next coating generation
Primer adaption
No limited in using
Towels can reused
Greater Chemical Resistance
Extreme Durability
Produces a distinctive finish with the cold tones of silica and the warm tones of carnauba in a symphony of gloss.
Strong beading
Unique slick surface smoothness
Creates a thick layer of hardness

*:NOTE:* 2-Part System - Use INVINCIBLE | PRIMER or PRIMER SPRITZ before COSMIC SPRITZ SPRAYCOAT form the full hardness.

POLISHANGEL® GLASSCOAT™| COSMIC SPRITZ SPRAY is the latest developed spray coating with PRIMER adaption which allows us know to get a minimum protection up 12-14 months.

COSMIC SPRITZ SPRAYCOAT has a very high concentration Silica and Titanium Dioxide. Silica produces an extremely hard durable surface that protects against corrosion. Titanium dioxide provides extreme shine and color transparency.

COSMIC SPRITZ requires only a minimal amount of product to be effective. COSMIC SPRITZ leaves no residue on the plastic parts. Can be used as a drying aid.

Directions

Before COSMIC SPRITZ SPRAYCOAT Application:

Thoroughly clean and decontaminate paint
Use INVINCIBLE | PRIMER or PRIMER SPRITZ, which contains the hardeners for COSMIC SPRITZ SPRAYCOAT

* Work INVINCIBLE | PRIMER until it is nearly clear to ensure the hardeners are prepared to accept COSMIC SPRITZ SPRAYCOAT.
* If defects are severe, use MASTER COMPOUND prior to INVINCIBLE | PRIMER.
* The use of INVINCIBLE | PRIMER negates the need for any IPA or Panel Wipes prior to applying this coating.
* After using INVINCIBLE | PRIMER apply the first coat of COSMIC within 9 hours.

Alternatively, use PRIMER SPRITZ instead of PRIMER polish.

Application:

Shake well before use
Surface must be cool and out of direct sunlight
Make sure surface is prepared and free of contamination before applying
Spray a very small amount onto the paint surface or into a microfiber towel
Wipe until product is spread thin and evenly
Remove any remaining residue with a separate microfiber towel

For Relayering:

Allow 30 minutes after initial application before applying a second layer. Specific binding receptors ensure perfect cohesion. For perfect layering we reccomend to aplly 2 coats.

Curing:

* After application, wait 30 minutes to buff of the residue.
* The surface should not come in contact with heat or water in the following 12-24 hours.
* Over the 24 hours following application, the gloss & hardness will increase tremendously

After Care:

For after care we recommend washing the vehicle with GLASSCOAT SHAMPOO. Also use COSMIC SPRITZ SPRAYCOAT for maintenance without PRIMER.

Safety Data Sheet - Sicherheitsdatenblatt